Classic Class A design using 2 x EL84 output valves and 3 x ECC83 pre-amp valves. Special design tone network. Setting all tone controls fully anti-clockwise gives no output. Dial in exact tone you want. Like having three extra volume controls at different frequencies!! High and low sensitivity inputs. Gain and Master volume controls. No FX loops or DIs or other interuptions from your guitar to those sweet sustaining tubes. Giving you the creamiest, raunchiest controllable distortion on the planet. Use with our specially designed 2 x 12" speaker cabinet, or for that big sound, use with our 4 x 12". Powerful enough to drive both of them. 4, 8 and 16 ohm selector for matching to any cabinet. All Hiwatt point to point construction.

Also available as 2 x 10" combo using 2 special design Fane 75watt 10" loudspeakers. Nicely tuned for our 20w amp. A powerful amp solution for playing at club level, in a compact and rugged design.

Dimensions for Head (Width x Depth x Height) and Weight (kg)
515 x 245 x 240 17Kg
Dimensions for Combo (Width x Depth x Height) and Weight (kg)
630 x 290 x 490 24Kg

The new 7w amplifier is our latest custom shop model based on our ever popular single ended output design. Utilising 2 ECC83 preamp valves and 1 EL84 output valve, to produce the classic Hiwatt sound at a much reduced and studio friendly volume!
Also available as a 1 x 10" combo specifically designed for the home environment and provides the classic Hiwatt sound in a scaled down format.

Dimensions for Head (Width x Depth x Height) and Weight (kg)
520 x 210 x 200 8Kg
Dimensions for Combo (Width x Depth x Height) and Weight (kg)
520 x 210 x 420 15Kg

Switchable output stage using 2 x EL84s in Studio mode=20watts, 4x EL84s in Stage mode=40watts. Using specially wound output transformer , saturation is maintained in both Studio and Stage modes. High and Low sensitivity inputs, gain with switchable boost, bass, middle, treble, full size accutronic spring reverb and master volume. Class A output with no feedback for full linear gain from your guitar to the output. Just dial in the maximum volume and gain you want and control the rest from your guitar for the ultimate tone that only a British hand built amplifier can give you. Finally 2 Fane specially designed Hiwatt 12" speakers all assembled in an 18 marine ply cabinet. This amp is built to last!!

Dimensions for Combo (Width x Depth x Height) and Weight (kg)
680 x 290 x 530 29Kg

Classic Class A design. Using 4 x EL84 output valves together with 3 x ECC83s and an ECC81. Studio setting uses 2 x EL84s to give you the sustain and overdrive you need at more manageable levels (like our 20w model). Switch to Stage setting and use all 4 EL84s together with our special wound output transformer, giving you all the power and sustain you need. Still not enough, then pull out the gain switch for serious overdrive, but yet still hear the tone of your guitar. How a classic British valve amp should sound. Now dial in the all tube design Accutronics spring reverb, back off you guitar volume and you have the coolest sounding amp on the planet. All this and a useble "musical" 3 stage tone network this amp does it all!! Use it with our classic 2 x 12" speaker cabinet, or even our 4 x 12" cabinet for that extra big sound!

Dimensions for Head (Width x Depth x Height) and Weight (kg)
590 x 280 x 250 21Kg